View Full Version : Offset question?
Matth3wJL
06-25-2006, 06:14 PM
Will a 22x9.5 with a 13 offset fit? What would I need to find out if it would or not? The lip is HUGE.
http://images.superbuytires.com/images/wheels/c1d08864b1055f28e2c6fb2bc91ad292.jpg
?
hulkss
06-25-2006, 09:06 PM
use this:
Wheel Offset Calculator (http://www.1010tires.com/WheelOffsetCalculator.asp)
The stock wheels are 8.0 inches wide with 46mm offset.
So if you enter those numbers plus those for the new wheel you get:
14mm more inside clearance (the rim edge is more to the outside). This in itself is OK, however, the outer edge is extended 52mm more to the outside. Definitely sticking out of the fender well.
Hawkvoy
06-25-2006, 09:54 PM
Another good site for this is wheelsmaster.com, click on the "size comparer" link and it will help determine fitment.
boostnss
06-26-2006, 03:50 AM
I like those wheels too but they dont make them with the right lug pattern :mad:
Matth3wJL
06-26-2006, 05:31 PM
I like those wheels too but they dont make them with the right lug pattern :mad:
:sadcry:
paul2005TB
06-26-2006, 09:08 PM
finally the offset Im looking for ..but that is easy to find in the WRONG bolt pattern.. back to the drawing board.