View Full Version : P/N for Intake Manifold?
02redhawk
07-05-2006, 09:20 PM
Can anyone confirm the GM part number for the SS's intake manifold, and if indeed its the same one used on the other 5.3L GMT360s? (same as the fullsize 4.8/5.3 as well?)
I'll head to the dealer to confirm on Friday, but was hoping to have the answer (and save the trip) prior to then....
TIA!
John Skiba
07-05-2006, 10:22 PM
I will look it up tomorrow Mike.
02redhawk
07-05-2006, 10:43 PM
Hey John, thanks...
BTW, I finally had a look-see at the PCV tonite. Geez.....
John Skiba
07-05-2006, 11:19 PM
Hey John, thanks...
BTW, I finally had a look-see at the PCV tonite. Geez.....
What, you mean this work of art? :p
I already have my plug, hose and filter ready to go off the valley cover area feed. BTW, did you pull it apart? Is the PCV valve at the intake. I didn't pull it all off, just the hose... just enough to see all the oil in the hose. LOLs
http://www.voitechwebdesign.com/misc/tbss/misc/images/DSC02511.jpg
BLK60SS
07-06-2006, 10:41 AM
Can anyone confirm the GM part number for the SS's intake manifold, and if indeed its the same one used on the other 5.3L GMT360s? (same as the fullsize 4.8/5.3 as well?)
I'll head to the dealer to confirm on Friday, but was hoping to have the answer (and save the trip) prior to then....
TIA!
Part# is 12580420. Usage includes 06-07' TBSS and 07' 4.8/5.3 full size.
The 06' SSR uses the 12580420 but the 05' uses a 89017588.
02redhawk
07-06-2006, 08:57 PM
Thanks for the P/N confirmation. :)