View Full Version : can someone please measure their stock front ride height
sskillz
08-11-2006, 01:40 PM
from ground to the center of the bottom of the fender? Thanks!
T-BlazinOn22s
08-11-2006, 02:01 PM
You talkin about right above the wheel? And are you talkin about an SS? I'll run out and check if so.
EDIT: NM I see you're talkin about the SS.
Ground from the center line of the hub to the bottom of the front fender wells (with the engine off).
Drivers Side: 33"
Passengers Side: 32 1/8"
For some reason, they all seem to be weak on the passenger side (even on the rear, engine on or off), and yes...it looks like it leans to the left (passenger side).
Rube1966
08-11-2006, 06:41 PM
Driver's side = 32 3/4
Passenger Side= 32 1/2
on my SS.
Regards
sskillz
08-11-2006, 07:39 PM
perfect. Regular TB springs dropped more than I expected! Now I gotta figure out which of the springs I used are in there?! dammit.
Anyway, Im sittin at 31.5"LF 31.75RF
I only have a few hundred miles on mine (4/06 manufacture date), so I am hoping these front springs (especially on the drivers side), will settle down a little more with time.
JohnnyZ28
08-12-2006, 02:05 PM
Let's see some pictures... :)
ltz03
08-12-2006, 04:27 PM
well if you sit in the car and have someone measure the heights the should be the same.