View Full Version : Electrial Issue....
SUVette06
01-21-2006, 11:51 AM
Just curious to see if anyone else has an issue like this:
A few times now, when I get in and start the truck, the security light remains on and none of the door controls work(windows, door locks, seat warmers) on either side, driver or passenger. If I drive it, get out, and come back later, everything works fine!I am trying to avoid the dealer at all costs, at least for a while, so I keep hoping it doesnt happen again. Antone else having this issue?
Fishhunter911
01-21-2006, 12:05 PM
I havent had anything like that happen. Sounds like a harness is loose. have you tried wiggling the harnesses under the dash then try the switches?
SUVette06
01-21-2006, 12:25 PM
Kinda what I thought as well, just havent really looked at it yet. Figured I would ask around to be sure it was just me!
Fishhunter911
01-21-2006, 12:36 PM
Well it may just be you :rotfl: .j/k.... but that is a good start.
HOTRODSURFER
01-21-2006, 04:55 PM
check connecto to ignition switch and connection at pass lock,did you hav a remote starter put in?? have seen remote starts confuse bcm and make all kinds of crazy crap happen:weird: if coonections are good at ignitioon switch and pas lock iwould suspect faulty ignition/pass lock or bcm?? just going on some things ive seen im my shop!!
SUVette06
01-23-2006, 11:16 PM
No remote starter, but Ill check out the other thing you suggested. Thanks for the info!
GTPprix
02-07-2006, 01:47 PM
All 2006's are subject to this problem at this time. It happens when the Drivers and Passenger side door modules wake up at the exact same time and the data collision causes an error that pulls the class 2 bus high and bumps all the cabin modules off the bus. This is a known issue that they are testing calibrations for at this time, no clue on an actual release date though.
SUVette06
02-07-2006, 04:49 PM
I was just talkin to Bean counter about this....seems he was having the same issue, with no resolution or idea of the problem from the dealers end. You say they are aware of it?
TonyGXP
02-07-2006, 05:07 PM
All 2006's are subject to this problem at this time. It happens when the Drivers and Passenger side door modules wake up at the exact same time and the data collision causes an error that pulls the class 2 bus high and bumps all the cabin modules off the bus. This is a known issue that they are testing calibrations for at this time, no clue on an actual release date though.
Chris....All I saw in your post was :1001010100101010100101001010100101010101010101010 101010, but It's OK :D.
remember not all of us here speak the same language!! lol
GTPprix
02-07-2006, 05:13 PM
Yup service operations is VERY aware of the problem and has some beta fixes being tested right now.
Tony think of it this way, two people on the phone trying to have a conversation without the other one ever stopping to listen to what the other side has to say, just incessant talking hehe gets a little jarbled eh? :)
ghoster
02-07-2006, 05:17 PM
Yup service operations is VERY aware of the problem and has some beta fixes being tested right now.
Tony think of it this way, two people on the phone trying to have a conversation without the other one ever stopping to listen to what the other side has to say, just incessant talking hehe gets a little jarbled eh? :)
so you are saying its like 2 women during the superbowl. Non stop babbling from both sides, and nobody can understand a damn word, or watch the game. I think I got it.:D
Fishhunter911
02-07-2006, 05:35 PM
huh what did you say? ^^:laugh:
GTPprix
02-07-2006, 05:42 PM
so you are saying its like 2 women during the superbowl. Non stop babbling from both sides, and nobody can understand a damn word, or watch the game. I think I got it.:D
Ding ding we have a winner!
SUVette06
02-07-2006, 05:53 PM
so you are saying its like 2 women during the superbowl. Non stop babbling from both sides, and nobody can understand a damn word, or watch the game. I think I got it.:D
:rotfl: