CV Shaft Torque

[slwburn]

Does anyone know the torque specified for the front CV shafts?

I just changed a bearing and noticed on the box they state that an impact gun will damage the bearing and that it should be tighted to the specified torque, which isnt given.

Thanks in advance!

[gmsuv]

Fastener Tightening Specifications
Application
Specification

Metric
English

Brake Hose Bracket Retaining Bolts
10 N·m
89 lb in

Drive Axle Nut
140 N·m
103 lb ft

Lower Ball Joint Retaining Nuts
110 N·m
81 lb ft

Lower Control Arm Bracket Front Mounting Bolt
260 N·m
192 lb ft

Lower Control Arm Bracket Rear Mounting Bolt
240 lb ft
177 lb ft

Lower Control Arm to the Lower Control Arm Bracket Mounting Nuts
110 N·m
81 lb ft

Outer Tie Rod to the Steering Knuckle Retaining Nut
45 N·m
33 lb ft

Shock Absorber Retaining Nut
45 N·m
33 lb ft

Shock Module Upper Retaining Nuts
45 N·m
33 lb ft

Shock Module Yoke to the Lower Control Arm Retaining Nut
110 N·m
81 lb ft

Shock Module Yoke to the Shock Absorber Pinch Bolt
70 N·m
52 lb ft

Stabilizer Shaft Insulator Clamp Mounting Bolts
55 N·m
41 lb ft

Stabilizer Shaft Link Retaining Nuts
105 N·m
77 lb ft

Upper Ball Joint Pinch Bolt
40 N·m
30 lb ft

Upper Control Arm Mounting Bolts
150 N·m
111 lb ft

Wheel Hub and Bearing Mounting Bolts
105 N·m
77 lb ft

Wheel Stud
130 N·m
95 lb ft

Wheel Speed Sensor to the Wheel Hub and Bearing Mounting Bolt
18 N·m
13 lb ft