View Full Version : TB SS nitrous??
wickedss
05-21-2006, 06:42 PM
Anyone installed a nitrous kit on their TB SS yet?
I'm thinking about going w/ a 100 or 125 shot and I'm wondering what kits are out for this motor/truck.
I'd like a kit that can be un-installed so that you can never tell it was on the truck...no holes, drilling, etc....
Also, what times have you ran while spraying :cool:
1BADSS
05-21-2006, 06:48 PM
I think BLUBYU is running nitrous. He's in the low 12's
SSMAT
05-22-2006, 07:32 PM
I have the NX kit running a 150 shot havnt had a chance at the track yet but lots of fun on the street. 325/338 stock 441/482 on the spray. hope to hit the track in the next couple weeks
The Dark SSide
05-22-2006, 08:07 PM
SSMAT what setup are you useing I have a friend who had a wet kit for sale and wanted to know if our intake manifold has a problem flowing fuel. Or if I would be better off buying a dry kit so I could hide it easier.
I would do a 100 to 125 wet kit. Just to be on the safe side Nitrous Oxide Kits NOS ZEX NX Nitrous Express Cold Fusion (http://www.nitrousdirect.com/), there is a cool setup on here that replaces the Mass air meter with a new one with the nozzles and silenoids built right in
Speed Inc
05-23-2006, 11:49 AM
There are a few things to consider.
Besides the kit what else would you need to have it installed. Would you need a bottle warmer, window switch, purge, switch panel?
Being an LS2 motor there are few new options, and some that would work out very well. You could put the nozzle right in the induction tube with a standard NX kit, you could also run a plate behind the TB with a new NOS plate kit. I would not use the NX MAF kit or the TNT power ring because of the induction bend.
cakiki
05-23-2006, 04:57 PM
i think the spacer plate setup would put the intake tube into the fan or it looks that way . someone tell me if im wrong .
blktbon20s
05-23-2006, 05:01 PM
i think the spacer plate setup would put the intake tube into the fan or it looks that way . someone tell me if im wrong .
please post some pics of ur SS!
Speed Inc
05-23-2006, 05:12 PM
i think the spacer plate setup would put the intake tube into the fan or it looks that way . someone tell me if im wrong .
Something like the TNT power ring would, but a plate behind the TB is not that thick and should still work.
PEDRO
05-23-2006, 06:16 PM
like thishttp://i30.photobucket.com/albums/c345/strippermotorsports/Trailblazer%20SS/e605e4ea.jpg
cakiki
05-23-2006, 09:05 PM
is that with the stock intake tube?
PEDRO
05-24-2006, 01:43 PM
u got me but ill ask her????