View Full Version : 10 inch wheels
boostnss
05-24-2006, 08:53 PM
ok tb and envoy guys anyone running 22x10's ? if so what offset any info would be helpfull Thanks
cakiki
05-24-2006, 09:38 PM
im runnin 22x9.5 with a 265/35 r 22 tire with no clearence problems and 4lbs lighter per wheel than stock. after the tires warm i cant spin them even very little holding the brake with trac disabled.
2002SLT
05-24-2006, 09:59 PM
im runnin 22x9.5 with a 265/35 r 22 tire with no clearence problems and 4lbs lighter per wheel than stock. after the tires warm i cant spin them even very little holding the brake with trac disabled.
Hey Cakiki! Can we see some pic's of your SS with the 22's on it. The Avator doesn't count. Too small. :p
VTODD
05-24-2006, 10:35 PM
after poking around the frong suspension, there seems to be some sort of bump stop on the front struts or something that looks like a bump stop just barely a few milimeters away from the front tires.
if we go any wider/bigger, how are we clearing these hard parts on the front?
todd
NORCAL SS
05-25-2006, 12:12 AM
i dropped my tbss 2 inches more over stockand this is the lowest you can go without getting a smaller tire. I barly rub in front on big bumps. i ordered 22x8.5 and 22x10s but decided to back out. Spending it on other stuff but im going to send out my wheels to get widened to 10 inches
TBSSTony
05-25-2006, 11:11 AM
but im going to send out my wheels to get widened to 10 inches
Uh-huh. ;) I've been reading that for how long now?
I only tease because I'd like to see someone ACTUALLY do it. After seeing a BMW X-5 with 275 fronts and 315 rears my tires look like pizza cutters!
NORCAL SS
05-25-2006, 04:51 PM
and have you also read that ill go 1/2s on a set on ebay. id rather send 2 rims out to get done that have never been mounted. Just other members said they would go halfs but no one has stepped out.
TBSSTony
05-26-2006, 11:51 AM
and have you also read that ill go 1/2s on a set on ebay. id rather send 2 rims out to get done that have never been mounted. Just other members said they would go halfs but no one has stepped out.
For awhile I read "this weekend" several times, like it was a done-deal. Hopefully you'll actually do it if you can find someone to partner up with you. Good luck!
Me, I'm in no position right now to do anything, just want to see someone actually do it. I think it would look "right". :yes:
NORCAL SS
05-26-2006, 01:09 PM
i know someone that will do it right. one of my customers sss he did 20x11 in rear and turned out perfect with the stock wheel.
PEDRO
05-26-2006, 02:02 PM
^^^ any pics of that?
03slt_soccal
05-26-2006, 03:19 PM
did somebody what 10" wheels (http://www.golfcarttirestore.com/chrome%20wheels.htm)
TBSSTony
05-26-2006, 11:41 PM
^^^ any pics of that?
:iagree:
NORCAL SS
05-26-2006, 11:50 PM
wellanother issue came up. Today when rechecking onmy shocks my rear is rubbing on the inside.
seems that on the front of the tires inner fender is close to the tire stock and with me lowering it as low as i am it barly touches on hard cornering. Ill have to prob cut the inner part of the fender off which isnt to bad. No way you will be able to fit wider wheels 10 inches wide if you lower it. Maybe stock but i havent yet measured the space on a stock truck. Ill try to get pics tomm